Relationship between soft tissue dimensions and tomographic radial root position classification system for immediate implant installation.

The aim of this study was to evaluate the relationship between soft tissue dimensions and radial root position (RRP) classification for immediate implant placement on maxillary anterior teeth. Maxillary anterior teeth (n = 420) were analyzed in the radial plane of cone beam computed tomography (CBCT) scans. Each tooth was classified according to its RRP: class I, (IA, IB); class II (IIA, IIB) class III; class IV, and class V. Soft tissue thickness at different landmarks, supracrestal soft tissue height, and crestal bone thickness were measured in CBCT. Keratinized tissue width was clinically measured. Gingival phenotype (thick or thin) was evaluated by transparency of the periodontal probe and at the landmark 2 mm from the gingival margin in CBCT. Class I tooth position accounted for 31.7%, class II for 45%, class III for 13.3%, class IV for 0.5%, and class V for 9.5%. The gingival phenotype was associated with RRP (χ2 test, p < 0.05). Soft tissue dimensions were significantly different over RRP classes (ANOVA and Tukey tests, p < 0.05). Types IA and IIA presented both thick soft and hard tissues. When planning immediate implants in the anterior maxilla, soft tissue dimensions evaluation should be incorporated into RRP classification to increase the accuracy and predictability of treatment outcomes.

Correlation of gingival stippling with periodontal phenotypical features: A cross-sectional study.

This study aimed at determining the correlation between gingival stippling (GS) and other phenotypical characteristics. Adult subjects in need of cone-beam computed tomography scans (CBCT) and comprehensive dental treatment in the maxillary anterior region were recruited. Facial gingival thickness [GT] and buccal bone thickness [BT] were assessed utilizing CBCT. Standardized intraoral photographs were obtained to determine keratinized tissue width (KTW), presence of GS in all facial and interproximal areas between the maxillary canines, and other variables of interest, such as gingival architecture (GA), tooth shape, and location. Statistical analyses to assess different correlations among recorded variables were conducted. A total of 100 participants and 600 maxillary anterior teeth constituted the study population and sample, respectively. Facial GS was observed in 56% of males and 44% of females, and it was more frequently associated with flat GA, triangular and square/tapered teeth, central incisors, and males. Greater mean values of GT, BT, and KTW were observed in facial areas that exhibited GS. Interdental GS was present in 73% of the sites and it was more frequently observed in males, the central incisor region, and when facial GS was present. Multilevel logistic regression revealed a statistically significant association between the presence of GS and KTW, BT measured at 3mm apical to the bone crest, and tooth type. This information can be used in the recognition of common periodontal phenotypical patterns associated with specific features of great clinical significance.

Non-invasive assessment of peri-implant mucosal thickness: A cross-sectional study.

BACKGROUND: This study aimed to evaluate the reliability and reproducibility of different non-invasive methods for the assessment of peri-implant mucosal thickness. METHODS: Subjects with two adjacent dental implants in the central maxillary region were included in this study. Three different methods to assess facial mucosal thickness (FMT) were compared: digital file superimposition using Digital Imaging and Communication in Medicine (DICOM) and stereolithography (STL) files of the arch of interest (DICOM-STL), DICOM files alone, and non-ionizing ultrasound (US). Inter-rater reliability agreements between different assessment methods were analyzed using inter-class correlation coefficients (ICCs). RESULTS: A total of 50 subjects with 100 bone-level implants constituted the study population. Assessment of FMT using STL and DICOM files demonstrated excellent inter-rater reliability agreement. Mean ICC values of 0.97 and 0.95 were observed in the DICOM-STL and DICOM groups, respectively. Comparison between the DICOM-STL and US revealed good agreement, with an ICC of 0.82 (95% CI: 0.74 to 0.88) and a mean difference of -0.13 ± 0.50 mm (-1.13 to 0.86). Comparison between DICOM files alone versus US showed good agreement, with an ICC of 0.81 (95% CI: 0.73 to 0.89) and a mean difference of -0.23 ± 0.46 mm (-1.12 to 0.67). Comparison between DICOM-STL and DICOM files revealed excellent agreement, with an ICC of 0.94 (95% CI: 0.91 to 0.96) and a mean difference of 0.1 ± 0.29 mm (LOA -0.47 to 0.46). CONCLUSIONS: Quantification of peri-implant mucosal thickness via analysis of DICOM-STL files, DICOM files, or US assessment are comparably reliable and reproducible methods.

Relationship between supracrestal soft tissue dimensions and other periodontal phenotypic features: A cross-sectional study.

BACKGROUND: The purpose of this study was to determine the association between periodontal supracrestal soft tissue dimensions (PSSTDs) and other phenotypic features in non-molar maxillary teeth. MATERIALS AND METHODS: Adult subjects in need of comprehensive dental treatment were recruited. Periodontal phenotypic variables (i.e., facial and palatal gingival thickness [GT], alveolar bone thickness [BT], and PSSTDs, namely distance from the gingival margin to the bone crest defined as periodontal supracrestal tissue height [PSTH] and distance from the cementoenamel junction to the bone crest [CEJ-BC]) were recorded using cone-beam computed tomography scans. Standardized intraoral photographs were obtained to assess facial keratinized tissue width (KTW) and other anatomical parameters (i.e., tooth type, gingival architecture, and interproximal papilla height). RESULTS: The study sample was constituted of 87 participants that contributed with a total of 522 maxillary anterior teeth. Differences in mean values of PSSTDs, KTW, GT, and BT were observed between tooth types and sex. Males exhibited a thicker GT and BT, and taller PSTH and KTW compared to females. Shorter CEJ-BC was associated with shorter PSTH, wider KTW, and thicker GT and BT. Shorter PSTH was associated with thicker facial BT. Notably, BT and GT were positively correlated at both facial and palatal sites, meaning that the thicker the gingival phenotype, the thicker the bone morphotype. Facial BT and facial GT were positively correlated with KTW. A flat gingival architecture was associated with the thick periodontal phenotype. Square teeth had shorter CEJ-BC, wider KTW, and thicker GT. CONCLUSIONS: Periodontal phenotypic features vary across and within subjects, between facial and palatal sites at different apico-coronal levels, and as a function of sex and tooth type. The shorter the PSSTDs, the wider the KTW and the thicker the GT and BT. PSSTDs, particularly PSTH, should be considered an integral component of the periodontal phenotype.

Current landmarks for gingival thickness evaluation in maxillary anterior teeth: a systematic review.

OBJECTIVES: To identify and report the current landmarks used for measuring gingival thickness (GT) in healthy maxillary anterior teeth. MATERIAL AND METHODS: The protocol of this Preferred Reporting Items of Systematic Reviews and Meta-Analyses (PRISMA) 2020-compliant systematic review was registered in PROSPERO. A literature search was conducted to identify articles that met the eligibility criteria published up to 2022. The methods of assessing gingival thickness and the landmarks adopted on the studies were described. Primary outcomes were identified, and the frequency of reporting in the selected articles was calculated. Additionally, risk-of-bias assessments were performed for individual articles. RESULTS: Fifty-eight articles (34 with low risk of bias and 24 with medium risk of bias) were selected. A total of 3638 individuals had their gingival thickness measured. Thirty-nine different landmarks were adopted in the studies. Fifty-six articles with 22 landmarks were included in the meta-analysis. A higher heterogeneity was found between the studies (GT ranged from 0.48 to 2.59 mm, mean GT 1.074; 95% CI: 1.024-1.104). The 3 most used landmarks were 2 mm from gingival margin (10 studies, mean GT 1.170 mm, 95% CI: 1.085-1.254), bone crest (9 studies, mean GT 1.01 mm; 95% CI: 0.937-1.083), and cemento-enamel junction (7 studies, mean GT 1.172 mm; 95% CI: 1.105, 1.239). CONCLUSIONS: Within the limits of this study, a large heterogeneity in GT was found, and there was no consensus on the ideal landmark for GT measurement. CLINICAL RELEVANCE: The landmark 2 mm from gingival margin, located at attached gingiva, can be used for GT measurement by clinical and image-based devices. This is an important step for a quantitative instead of a qualitative evaluation of phenotypes.

Relationship between smile type and periodontal phenotype: A clinical and tomographic cross-sectional study.

OBJECTIVES: To evaluate the correlation between smile type (ST) and the periodontal phenotype (PP). MATERIAL AND METHODS: Clinical and photographic examinations of 164 participants (48 men and 116 women, mean age 22.9 ± 4.6 years) were performed, including an evaluation of ST (high, average, and low), gingival phenotype (GP) by transparency of the periodontal probe (TRAN), keratinized tissue width (KTW), gingival architecture (GA), tooth shape (TS), and papilla height (PH). A subgroup of 70 participants underwent soft-tissue cone-beam tomographic examinations (ST-CBCT), in which GP, gingival thickness (GT), buccal bone thickness (BBT), and the distances from the gingival margin and cementoenamel junction to the buccal bone crest (GM-BBC and CEJ-BBC) were evaluated. The data were analyzed using one-way ANOVA, Student's t-test, and chi-square tests, with the level of significance set at 0.05. RESULTS: High, average, and low STs were found in 31.7%, 56.7%, and 11.6% of the participants, respectively. Sex (p=0.001), GP evaluated using TRAN (p=0.021) and ST-CBCT scans (p=0.009), GA (p<0.001), and TS (p=0.001), were associated with STs. The prevalence of thin GP was: 63% in low, 50% in average, and 38% in high smile types. KTW (p=0.004), PH (p<0.001), GT at different landmarks (p<0.05), CEJ-BBC (p=0.017), and GM-BBC (p=0.001) were significantly different among STs. The highest GT and KTW were found in the high-smile group, average-smile presented the higher CEJ-BBC while GM-BBC and PH, were higher in low-smile group. CONCLUSION: Periodontal phenotype components presented important difference over the smile types. CLINICAL RELEVANCE: A detailed examination of smile types is an essential part of treatment planning, especially when the patient has high esthetic demands. Clinical and tomographic individual analysis of periodontal phenotypes over the smile types may be helpful for a case-by-case approach, and for the development of well-defined treatment protocols.

Gingival landmarks and cutting points for gingival phenotype determination: A clinical and tomographic cross-sectional study.

BACKGROUND: This cross-sectional study assessed the role of gingival landmarks (GLs) and cutting points (CPs) for gingival phenotype (GP) determination. METHODS: Six maxillary anterior teeth (70 subjects) were evaluated using soft tissue cone-beam computed tomography (ST-CBCT). Gingival thickness was measured at different GLs: 1) tissue zone (gingival margin [GM], 1 and 2 mm apical to GM, cemento-enamel junction, above the bone crest); 2) bone zone (buccal bone crest [BBC], 1, 2, and 3 mm apical to BBC). CPs of 0.6, 0.8, 1.0, 1.2, and 1.5 mm were used to discriminate between thin and thick GP. The clinical determination of GP was made based on transparency of the periodontal probe (TRAN). RESULTS: The prevalence of thin and thick GP depended on the GL and CP. Considering the CP (1 mm), thin GP at the tissue zone ranged from 99% at the GM to 10.2% above the bone crest. In the bone zone, thick GP ranged from 28% at the BBC to 6% at 3 mm apical to the BBC. The predictability of a correct assessment of GP by TRAN compared with ST-CBCT was influenced by the GLs and CPs. A slight agreement (kappa <0.2) and low accuracy (area under the curve <0.7) were found between methods. CONCLUSIONS: The determination of thin and thick GPs is related to the gingival landmarks and CPs. Further studies are required for a well-defined treatment protocol considering different gingival landmarks in tissue and bone zones. An ST-CBCT may be useful for this purpose.

Tomographic sagittal root position in relation to maxillary anterior bone housing in a Brazilian population.

Purpose: This cross-sectional study evaluated and categorized the tomographic sagittal root position (SRP) of the maxillary anterior teeth in a Brazilian population. Materials and Methods: Cone-beam computed tomographic scans of 420 maxillary anterior teeth of 70 patients (35 men and 35 women, mean age 25.2±5.9 years) were evaluated. The SRP was classified as class I, II, III, or IV. In class I, the root is positioned against the buccal cortical plate; in class II, the root is centered in the middle of the alveolar housing; in class III, the root is positioned against the palatal cortical plate; and in class IV, at least two-thirds of the root engage both the buccal and palatal cortical plates. Results: In total, 274 teeth (65.2%) were class I, 39 (9.3%) were class II, 3 (0.7%) were class III, and 104 (24.8%) were class IV. The frequency distribution over the teeth groups was different from the overall analysis. Important differences were found in the frequencies of classes I, II, and IV compared to other populations. Sex was not associated with the SRP classes (P=0.307). Age distribution was significantly different over the classes (P=0.004). Conclusion: The findings of this study on the distribution of SRP classes among the Brazilian population compared to other populations demonstrate that the SRP should be analyzed on a case-by-case basis for an accurate treatment plan in the maxillary anterior area.

Micro-tomographic analysis of the root trunk and pre-furcation area of the first mandibular molars.

This study analyzed the root trunk (RT) and the pre-furcation area (PFA) of mandibular first molars. Thirty lower first mandibular molars extracted due to advanced periodontal disease were evaluated in a high-energy spiral computerized micro-tomography. Two gutta-percha markings on the cementoenamel junction (CEJ) and at the furcation entrance (FE) at buccal and lingual surfaces served as reference points for measurements of RT length, and PFA width and depth, at the levels of CEJ, 1 mm apical to CEJ, 2 mm apical to CEJ, and at the FE. The mean RT length was 2.49 mm at buccal and 3.18 mm at lingual sides. The mean widths of the PFA at CEJ, at 1 and 2 mm apical to CEJ, and at FE were 2.9, 3.4, 3.9 and 4.3 mm, respectively, while the mean depths were 0.19, 0.32, 0.57 and 1.1 mm, respectively. The PFA coincided with CEJ in 10 buccal and 10 lingual surfaces, representing 33.33% of the sample. There was a negative correlation between RT length and PFA dimensions. This study concludes that the RT length was smaller than previous studies. From the CEJ up to the furcation entrance, the PFA showed a progressive increase in width and depth. The coincidence of the PFA area beginning at the CEJ in 1/3, and the negative correlation between RT length and PFA dimensions may represent greater risk factor for the early development of furcation lesions.

Periodontite agressiva avançada localizada, combinada com gengivite ulcerativa necrosante: dez anos de acompanhamento de um tratamento multidisciplinar / Severe localized aggressive periodontitis combined with necrotizing ulcerative gingivitis: a 10-year follow-up of a multidisciplinary treatment

Este relato de caso descreve o tratamento de um caso de periodontite agressiva avançada localizada, combinada com gengivite ulcerativa necrosante. A paciente apresentava migração patológica dos incisivos superiores com inclinação para vestibular, que exigiu uma abordagem multidisciplinar. Após a conclusão do tratamento periodontal, a terapia ortodôntica foi realizada. O tratamento desta paciente vem sendo conduzido com sucesso ao longo dos últimos dez anos.

Uma discussão sobre o efeito da rhBMP-2 no aumento ósseo alveolar / A discussion on the effect of rhBMP-2 in the alveolar bone augmentation

O objetivo deste trabalho foi apresentar uma revisão da literatura sobre a proteína óssea morfogenética tipo 2 (BMP-2) e seu efeito no aumento ósseo alveolar. A proteína óssea morfogenética (BMP) foi identificada, em 1965, por um norte-americano chamado Marshal Urist, que mostrou que essa proteína, extraída da cortical óssea bovina, poderia induzir a formação de novo osso quando implantada em locais não ósseos. Atualmente, muitos trabalhos têm estudado a regeneração óssea através do uso de BMPs em substituição aos enxertos ósseos. O presente estudo conclui que a proteína óssea morfogenética é capaz de induzir neoformação óssea de maneira eficaz, tornando-se uma alternativa na substituição dos enxertos ósseos e a necessidade da descoberta de novos carreadores facilitando a estabilidade mecânica da BMP-2 no leito receptor.

The aim of this paper is to review the literature about bone morphogenetic protein type 2 (BMP-2) and on the effect in the alveolar bone augmentation. In 1965, the BMP was isolated by Marshal Urist, who showed that this protein extracted from bone narrow could induce bone neoformation when implanted in sites without bone cells. Recently, a lot of studies have been looking for bone regeneration using BMPs without bone grafts. The present study it was concluded that the bone morphogenetic protein induces bone neoformation, being an alternative as a substitute to bone grafts and that new carrier discovery is necessary to smooth stability of this carriers in receptor site.

Biometric study of the prefurcation area of human mandibular first molars.

This study analyzed the length of the root trunk (RT) as well as the width and depth of the prefurcation area (PFA) of human mandibular first molars. Ninety-six human mandibular first molars that were extracted after being observed to be in poor condition both clinically and radiographically were used in this study. A contour-measuring instrument was used, and profiles of the buccal and lingual root surfaces of these teeth were traced on a millimeter-scaled paper. The profiles were recorded from the cementoenamel junction, millimeter by millimeter, up to the entrance of the furcation of each tooth. The width and depth of the PFA as well as the length of the RT were studied. After statistical analysis it was concluded that the mean widths of the PFA on the buccal and lingual surfaces were 3.68 ± 0.66 and 3.48 ± 0.51 mm, respectively; mean depths of the PFA on the buccal and lingual surfaces were 0.89 ± 0.42 and 0.82 ± 0.28 mm, respectively; and mean lengths of the RT on the buccal and lingual surfaces were 3.07 ± 0.82 and 3.54 ± 0.73 mm. Of the samples, the lengths of the RT and the PFA were coincident in 39.58% on the buccal surface and in 46.87% on the lingual surface. There is a concavity (PFA) in the RT region of all mandibular first molars, showing larger width and depth on the buccal surface. The RT was longer on the lingual surface in comparison with the buccal surface.

Evaluation of a dense polytetrafluoroethylene membrane to increase keratinized tissue: a randomized controlled clinical trial.

BACKGROUND: The presence of an adequate zone of keratinized tissue has been associated with implant health. This study evaluated the increasing of the zone of keratinized tissue using dense polytetrafluoroethylene (d-PTFE) membranes over extraction sites, without primary closure. MATERIALS AND METHODS: Fifteen sites received d-PTFE membranes. The control sites received no membranes. All cases were sutured with no attempt to achieve primary closure. Before surgery, initial measurements of buccal and lingual keratinized tissue were taken from the mucogingival line (MGL) to the most coronal gingival margins. Final measurements were taken from the buccal MGL to the lingual MGL, 60 and 90 days after extractions. RESULTS: In the test group, a mean increase in the zone of keratinized tissue of 7.06 ± 2.63 mm and 6.6 ± 2.84 mm was observed in 60 and 90 days, respectively. In the control group, a mean increase of 2.46 ± 1.59 mm and 1.40 ± 1.40 mm was observed in 60 and 90 days, respectively. CONCLUSION: Nonexpanded d-PTFE membranes can predictably be used to increase the zone of keratinized tissue in preparation to implant placement.

Supracrestal gingival tissue measurement in normal periodontium: a human histometric study.

Twenty-four teeth were extracted en bloc with the marginal periodontal structures and processed for histologic purposes. Measurements were taken from the top of the gingival margin to the apical limit of the junctional epithelium (GM-JE), from the apical limit of the junctional epithelium to the top of the alveolar bone crest (JE-AB), and from the top of the gingival margin to the top of the alveolar bone crest (GM-AB). Data were histometrically analyzed. This first clinical human study demonstrated mean measurements of 1.58 ± 0.41 mm for GM-JE, 1.18 ± 0.42 mm for JE-AB, and 2.75 ± 0.59 mm for GM-AB.

Biovidros: composição, indicações e uso clínico em implantodontia / Bioglasses: composition, indications and clinical use in implantology

No presente trabalho de revisão de literatura, foram abordados diversos aspectos sobre a utilização dos biovidros em implantodontia. Foram relatadas suas possíveis indicações clínicas e seus resultados em relação a outros biomateriais e com osso autógeno

In this literature review, general aspects on the bioglasses use in implantology were reviewed. Their clinical indications and results were reported they were also compared with other biomaterials and autogenous bone